TimeMaster II H.O.
                        
                 Copyright (C) 1986 by Applied Engineering
        
                                     
                           Pascal Instructions
                                     
             
             The programs that are provided on the disk will 
        enable Pascal programs to access the TimeMaster II clock 
        card.  All of main programs are already installed in a 
        standard system library file ready for use.  These 
        programs enable the programmer to retrieve a numerical
        representation of all the clock's day and time
        information or a pre-formatted string of the current
        time and date.
        
             In order to allow the Pascal system to access these 
        programs the current SYSTEM.LIBRARY file must be 
        replaced on your system bootup disk.  The new 
        SYSTEM.LIBRARY file contains all of the old Pascal units 
        plus the TimeMaster II unit.  To replase the old 
        SYSTEM.LIBRARY follow the steps below:
        
             1.  Enter the filer and remove the current
                 SYSTEM.LIBRARY.
        
             2.  Transfer the corresponding LIBRARY file on the
        TimeMaster II disk to your system bootup disk.  Use
        LIBRARY1.1 for Pascal 1.1 and LIBRARY1.2 for Pascal 1.2.
        
             3.  Change the name of LIBRARY file to 
                 SYSTEM.LIBARY.
             
             4.  Exit the filer.
        
        The installation is complete and the TimeMaster II 
        Pascal routines are now ready to use.
        
             If the SYSTEM.LIBRARY you are currently using has 
        been changed then the units must be installed into the 
        current library using the program LIBRARY.  You will 
        need to refer to the Pascal Operating System Manual for 
        further information on how to do this.  Remember to 
        check the segments used in the TimeMaster II units 
        against the segments in your current library.  If there 
        is a conflict then the TimeMaster II programs will need 
        to be changed and recompiled to reside in different 
        segments than the ones currently being used.
        
             There is an additional program that is provided
        that will automatically set the Pascal system date at
        bootup time.  This ensures that a file will be saved
        with current date without the user having use the date
        function in the filer.  To use this program the
        TimeMaster II units will have to be already installed
        into the SYSTEM.LIBRARY file.  Transfer the file
        STARTUP.TEXT to your system bootup disk.  Edit the file
        to use the correct poke for the system that you are
        using.  Next compile the file into a code file.
        Finally change the name of the code file to
        SYSTEM.STARTUP.  Then, every time the Pascal system is
        booted the system date will be updated.
        
             The source code and an example program are provided 
        that will demostrate how to use the new TimeMaster II 
        clock program.  If the current format for accessing the 
        clock does not fit your needs, all of the information
        needed to change it has been provided.